EINN STÆRSTI VINNUVÉLAFRAMLEIÐANDI Í HEIMI
5 ÁRA VERKSMIÐJUÁBYRGÐ EÐA SEM JAFNGILDIR 10.000 VINNUSTUNDUM
78.5 kW / 1,900 rpm
16,170 kg
6,020 mm
+ 5-year/5000 hour warranty as standard for complete peace of mind (Terms and conditions apply)
The efficiency of the SY155U means outstanding performance with low energy consumption.
+ Powerful short-tail-swing machine with short overhang radius enables working in tight spaces without any reduction in performance
+ Stage V ISUZU engine and efficient, load sensing hydraulics to maximise on fuel economy
+ Hammer, bi-directional and rotate pipework with proportional controls enabling maximum versatility whatever the application
+ 100% steel bodywork for maximum protection and reduced cost of ownership
Safety features of the SY155U ensure maximum safety to those in and around the machine.
+ ROPS/FOPS certified cab for safe operation
+ Rear view camera provides optimal visibility for increased on site safety
+ Battery disconnect switch
+ Travel alarm and rotating warning beacon to increase visibility, attract attention and ensure safety
+ Dozer blade provides maximum stability and lift performance
Welcome to the comfort zone of the SY155U!
+ Air suspension operator’s seat
+ Clear instrumentation and large high resolution colour display
+ Quiet, low vibration engine so noise levels are kept to a minimum
+ Adjustable ventilation, heating and automatic climate control system
+ Integrated cooling box and large amount of storage space
+ LED work lights for maximum visibility in low light conditions
+ Easy access to all maintenance points
+ Low maintenance requirements and longer service intervals
+ Ergonomic handrails allow safe access to the maintenance platform
+ Registered and protected with the CESAR Datatag Scheme (the premier initiative against equipment theft) and CESAR ECV for quick and easy verification of emissions category
“I believe I came home with the best excavators out there. I wouldn’t swap these new SANYs for anything else” –
Daniel Connolly – ReCon Waste
| DIMENSIONS | |
| Overall length | 8,015mm |
| Overall width | 2,690 mm |
| Overall width of superstructure | 2,490 mm |
| Overall height | 2,820 mm |
| Rear length | 1,500 mm |
| Track width | 1,990 mm |
| Landing gear length | 3,665 mm |
| Landing gear width (dozer blade) | 2,590 mm |
| Blade height | 480 mm |
| Track link width | 600 mm |
| Min. ground clearance | 425 mm |
| Tail swing radius | 1,500 mm |
| Distance between track wheel and guide wheel (center) | 2,930 mm |
| Boom length | 4,600 mm |
| Arm length | 3,000 mm |
| Bucket capacity | 0.6 m3 |
| WEIGHT | |
| Operating mass | 16,170 kg |
| WORKING RANGE | |
| Max. ground level range | 8,338 mm |
| Max. excavation depth | 6,020 mm |
| Max. vertical range | 9,218 mm |
| Max. dumping height | 6,756 mm |
| Minute. radius of gyration | 2,086 mm |
| Max. excavation depth, vertical wall | 3,796 mm |
| ENGINE | |
| Model | Isuzu AR-4JJ1XASC |
| rated power | 78.5 kW |
| Max. torque | 375 Nm/1,800 rpm |
| Shift | 2.9 l |
| HYDRAULIC SYSTEM | |
| Main pump | 2 Adjustable axial piston pumps |
| Maximum oil flow | 2 x 110 l / min |
| Travel drive | 2 Adjustable axial piston pumps |
| Slewing gear | 1 Adjustable axial piston pump |
| RELIEF VALVE SETTINGS | |
| Boom circuit | 343 bar |
| Slewing circuit | 253 bar |
| Drive circuit | 348 bar |
| Pilot control circuit | 40 bar |
| PERFORMANCE | |
| Swing speed | 12.5 rpm |
| Max. ground speeds | 5.3 km/h |
| Max. traction force | 124 kN |
| Climbing ability | 35° |
| ISO bucket breakaway force | 103 kN |
| ISO arm tear-out force | 67 kN |
| SERVICE REFILL CAPACITIES | |
| Fuel tank | 210 l |
| Engine coolant | 23.6 l |
| Engine oil | 15 l |
| Travel drive (per side) | 2.2 l |
| Hydraulic oil tank | 110 l |